CARBON EXPRESS NOCK LAUNCHPAD PRE.-60 FLUO OR
Features: Precise contact points for controlled arrow release. Concentric design to center the nock in the arrow shaft for more consistent...
Bohning’s Signature® Nock fits standard carbon shafts with an ID of .246″ (commonly known as 6.5mm or S Nock) and Super UNI Bushing systems. The Signature® Nock features a smooth throat and a raised index. Its throat size is .109″ (2.77mm) and each Signature® Nock weighs an average of 12.0 grains (777.6 mg).
Tech tip: for easier insertion and indexing, apply a small amount of Bohning’s Tex-Tite or Seal-Tite Wax to the nock shank.
NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL
At Bohning, every nock style must pass the following steps before introduction to the market:
1. Computer simulations identify potential weak points.
2. Destructive testing methods expose possible design flaws or material defects.
3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
16 otros productos en la misma categoría:
Features: Precise contact points for controlled arrow release. Concentric design to center the nock in the arrow shaft for more consistent...
The Beiter Insert-Nock .166" has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very...
Features: Precise contact points for controlled arrow release. Concentric design to center the nock in the arrow shaft for more consistent...
Nock 3-18/2, Colour: Green Kategorie: In-Nocken #2
Features: Fits Predator II Arrows 700-800 Spines Fits Predator II Youth Arrows 700-800 Spine Fits Amped-XS Arrows Available in: WH:...
In-Out nocks are designed to enter inside A.C.E. or X10 shafts. At the same time they cover the external side of the shaft itself in order to...
The Beiter Plug-in Nocks were originally developed for use as Nocks that are plugged directly into the aluminium shafts (instead of on the cone or...
Culatines de insertar para tubos con un diámetro interior de 6,2 mm. Conocido también como -60 o Super UNI. Disponible en los siguientes colores:...
Puntas de inserción para un diámetro interno de 4,2 mm (.165"), disponibles en la versión Small con un asiento para coccha de 0,088" y en la...
Symmetric nocks, which can be used on every Easton and Beman shaft equipped with this system. They are ideal if you use a loop on the string....
Plastic nock, suitable for shafts with -60 diameter. Colors available: BK = black FG = fluo green FE = fluo redPack de 12 piezas
The colours #21, #35, #57 and #89 are "Heavy" and differ from the Standard-Insert-Nock only because they are a little bit heavier and stiffer. The...