BOHNING NOCK UNI SUPER BUSHING
Bohning’s Blazer® Nock fits standard carbon shafts with an ID of .246″ (6.25mm, but commonly known as 6.5mm) and Super UNI Bushing systems. The...
Bohning’s Signature® Nock fits standard carbon shafts with an ID of .246″ (commonly known as 6.5mm or S Nock) and Super UNI Bushing systems. The Signature® Nock features a smooth throat and a raised index. Its throat size is .109″ (2.77mm) and each Signature® Nock weighs an average of 12.0 grains (777.6 mg).
Tech tip: for easier insertion and indexing, apply a small amount of Bohning’s Tex-Tite or Seal-Tite Wax to the nock shank.
NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL
At Bohning, every nock style must pass the following steps before introduction to the market:
1. Computer simulations identify potential weak points.
2. Destructive testing methods expose possible design flaws or material defects.
3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
16 otros productos en la misma categoría:
Bohning’s Blazer® Nock fits standard carbon shafts with an ID of .246″ (6.25mm, but commonly known as 6.5mm) and Super UNI Bushing systems. The...
Nock 3-18/2, Colour: Green Kategorie: In-Nocken #2
Culatín de insertar con diámetro interior de 4,5 mm apto para flechas denominadas -04 o para la Carbon Express Medallion®. Disponible en color:...
The Beiter Plug-in Nocks were originally developed for use as Nocks that are plugged directly into the aluminium shafts (instead of on the cone or...
The Beiter Insert-Nock has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very popular...
Nock 19/1 Kategorie: In-Nocken #1 Nock 19/2 Kategorie: In-Nocken #2 Available in: BL: Blue DBL: Dark Blue GR: Green OR: Orange PR:...
The Beiter Plug-in Nocks were originally developed for use as Nocks that are plugged directly into the aluminium shafts (instead of on the cone or...
A press-fit nock by AAE, the IP (Internal Plastinock) is designed with a shortened body for accuracy and strength. The .165 - .165 ID (or 4.2 mm)...
The 4mm G Nock is the heaviest 4mm Nock weighing in at 7 grains. The 4mm G Nock is compatible with the Inspire carbon arrow as with the Super...
Features: Fits Predator II Arrows 700-800 Spines Fits Predator II Youth Arrows 700-800 Spine Fits Amped-XS Arrows Available in: WH:...
The colours #21, #35, #57 and #89 are "Heavy" and differ from the Standard-Insert-Nock only because they are a little bit heavier and stiffer. The...
Finally a new system for the positioning of the arrow on the bow. The new ThunderBall system is mounted within a few minutes and eliminates any...