CARBON EXPRESS ENCOCHE CX HYPERTEK X MAXIMA
Encoche en plastique, pour tube de diamètre -60. Couleurs: BK = noir FG = vert fluo FE = rouge fluoPack de 12 pièces
Bohning’s Signature® Nock fits standard carbon shafts with an ID of .246″ (commonly known as 6.5mm or S Nock) and Super UNI Bushing systems. The Signature® Nock features a smooth throat and a raised index. Its throat size is .109″ (2.77mm) and each Signature® Nock weighs an average of 12.0 grains (777.6 mg).
Tech tip: for easier insertion and indexing, apply a small amount of Bohning’s Tex-Tite or Seal-Tite Wax to the nock shank.
NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL
At Bohning, every nock style must pass the following steps before introduction to the market:
1. Computer simulations identify potential weak points.
2. Destructive testing methods expose possible design flaws or material defects.
3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
16 autres produits dans la même catégorie :
Encoche en plastique, pour tube de diamètre -60. Couleurs: BK = noir FG = vert fluo FE = rouge fluoPack de 12 pièces
Enfin un nouveau système pour encocher vos flèches. Le nouveau système ThunderBall s’installe rapidement et évite tout problème de torsion de la...
Features: Precise contact points for controlled arrow release. Concentric design to center the nock in the arrow shaft for more consistent...
Encoche pour diamètre interne 5,2 mm. Disponible en couleurs: bleu fluorescent, vert fluorescent, orange opaque, jaune opaque, blanc opaque. Poids:...
The colours #21, #35, #57 and #89 are "Heavy" and differ from the Standard-Insert-Nock only because they are a little bit heavier and stiffer. The...
A press-fit nock by AAE, the IP (Internal Plastinock) is designed with a shortened body for accuracy and strength. The .165 - .165 ID (or 4.2 mm)...
Encoche pour un diamètre interne de 6,2mm. Le corps raccourci donne plus de solidité et le rend donc plus approprié pour une utilisation avec des...
The Beiter Insert-Nock .166" has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very...
The Beiter Insert-Nock has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very popular...
Les encoches sont disponibles dans la version Small avec un siège à encoche de 0,088" et dans la version Large avec un siège à encoche de 0,098"....