

Bohning’s Signature® Nock fits standard carbon shafts with an ID of .246″ (commonly known as 6.5mm or S Nock) and Super UNI Bushing systems. The Signature® Nock features a smooth throat and a raised index. Its throat size is .109″ (2.77mm) and each Signature® Nock weighs an average of 12.0 grains (777.6 mg).
Tech tip: for easier insertion and indexing, apply a small amount of Bohning’s Tex-Tite or Seal-Tite Wax to the nock shank.
NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL
At Bohning, every nock style must pass the following steps before introduction to the market:
1. Computer simulations identify potential weak points.
2. Destructive testing methods expose possible design flaws or material defects.
3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
16 autres produits dans la même catégorie :
Enfin un nouveau système pour encocher vos flèches. Le nouveau système ThunderBall s’installe rapidement et évite tout problème de torsion de la...
Features: Precise contact points for controlled arrow release. Concentric design to center the nock in the arrow shaft for more consistent...
The Beiter Plug-in Nocks were originally developed for use as Nocks that are plugged directly into the aluminium shafts (instead of on the cone or...
Encoche en plastique, pour tube de diamètre -60. Couleurs: BK = noir FG = vert fluo FE = rouge fluoPack de 12 pièces
L’encoche In - Out a été réalisée pour pouvoir rentrer à l’intérieur du tube ACE ou X-10 et également s’ajuster très précisément au-dessus de la...
Les encoches avec insert de diamètre intérieur 6,2 mm conviennent à une multitude de tubes et de flèches. Définies également -60 ou Super Uni....
Bohning’s Blazer® Nock fits standard carbon shafts with an ID of .246″ (6.25mm, but commonly known as 6.5mm) and Super UNI Bushing systems. The...
Features: Precise contact points for controlled arrow release. Concentric design to center the nock in the arrow shaft for more consistent...
The Beiter Insert-Nock .166" has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very...
Enfin un nouveau système pour encocher vos flèches. Le nouveau système ThunderBall s’installe rapidement et évite tout problème de torsion de la...