BOHNING NOCK UNI SUPER BUSHING BK
BOHNING NOCK UNI SUPER BUSHING AP
BOHNING NOCK UNI SUPER BUSHING LM
BOHNING NOCK UNI SUPER BUSHING RS
BOHNING NOCK UNI SUPER BUSHING NO
Bohning’s Blazer® Nock fits standard carbon shafts with an ID of .246″ (6.25mm, but commonly known as 6.5mm) and Super UNI Bushing systems. The Blazer® Nock features a double-lock throat and a raised index. Its throat size is .120″ (3.05mm) and each Blazer® Nock weighs an average of 9.0 grains (583.2 mg). Tech tip: for easier insertion and indexing, apply a small amount of Bohning’s Tex-Tite or Seal-Tite Wax to the nock shank.
NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL At Bohning, every nock style must pass the following steps before introduction to the market:
1. Computer simulations identify potential weak points.
2. Destructive testing methods expose possible design flaws or material defects.
3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Pack de 100 piezas
Culatines de insertar para tubos con un diámetro interior de 6,2 mm. Conocido también como -60 o Super UNI.
Disponible en los siguientes colores:...
6,59 €
Impuestos incluidos
16 otros productos en la misma categoría:
In-Out nocks are designed to enter inside A.C.E. or X10 shafts. At the same time they cover the external side of the shaft itself in order to...
1,67 € - 1,78 €
Impuestos incluidos
Culatines de insertar para tubos con un diámetro interior de 6,2 mm (.244"). Conocido también como -60 o Super UNI.El cuerpo más corto le da más...
6,59 €
Impuestos incluidos
Finally a new system for the positioning of the arrow on the bow. The new ThunderBall system is mounted within a few minutes and eliminates any...
17,49 €
Impuestos incluidos
Plastic nock, suitable for shafts with -60 diameter.
Colors available:
BK = black
FG = fluo green
FE = fluo redPack de 12 piezas
5,49 €
Impuestos incluidos
2,19 €
Impuestos incluidos
Nock 19/1
Kategorie: In-Nocken #1
Nock 19/2
Kategorie: In-Nocken #2
Available in:
BL: Blue
DBL: Dark Blue
GR: Green
OR: Orange
PR:...
1,21 €
Impuestos incluidos
Symmetric nocks, which can be used on every Easton and Beman shaft equipped with this system. They are ideal if you use a loop on the string....
1,21 €
Impuestos incluidos
Culatines de insertar para tubos con un diámetro interior de 6,2 mm. Conocido también como -60 o Super UNI.
Disponible en los siguientes colores:...
6,59 €
Impuestos incluidos
The Beiter Plug-in Nocks were originally developed for use as Nocks that are plugged directly into the aluminium shafts (instead of on the cone or...
1,21 €
Impuestos incluidos
In-Out nocks are designed to enter inside A.C.E. or X10 shafts. At the same time they cover the external side of the shaft itself in order to...
1,67 € - 1,78 €
Impuestos incluidos
Features:
Precise contact points for controlled arrow release.
Concentric design to center the nock in the arrow shaft for more consistent...
11,99 €
Impuestos incluidos
The Beiter Plug-in Nocks were originally developed for use as Nocks that are plugged directly into the aluminium shafts (instead of on the cone or...
1,21 €
Impuestos incluidos
Culatín de insertar con diámetro interior de 4,5 mm apto para flechas denominadas -04 o para la Carbon Express Medallion®.
Disponible en color:...
6,59 €
Impuestos incluidos
The Beiter Insert-Nock .166" has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very...
1,21 €
Impuestos incluidos
1,21 €
Impuestos incluidos
Features:
Precise contact points for controlled arrow release.
Concentric design to center the nock in the arrow shaft for more consistent...
11,99 €
Impuestos incluidos
