CROSS-X NOCKS 6.2
Culatines de insertar para tubos con un diámetro interior de 6,2 mm. Conocido también como -60 o Super UNI. Disponible en los siguientes colores:...
Bohning’s Blazer® Nock fits standard carbon shafts with an ID of .246″ (6.25mm, but commonly known as 6.5mm) and Super UNI Bushing systems. The Blazer® Nock features a double-lock throat and a raised index. Its throat size is .120″ (3.05mm) and each Blazer® Nock weighs an average of 9.0 grains (583.2 mg). Tech tip: for easier insertion and indexing, apply a small amount of Bohning’s Tex-Tite or Seal-Tite Wax to the nock shank.
NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL At Bohning, every nock style must pass the following steps before introduction to the market:
1. Computer simulations identify potential weak points.
2. Destructive testing methods expose possible design flaws or material defects.
3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Culatines de insertar para tubos con un diámetro interior de 6,2 mm. Conocido también como -60 o Super UNI. Disponible en los siguientes colores:...
16 otros productos en la misma categoría:
The Beiter Insert-Nock has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very popular...
Features: Precise contact points for controlled arrow release. Concentric design to center the nock in the arrow shaft for more consistent...
Culatín para inserto con diámetro interior de 5,2 mm. Disponible en color: azul fluo, verde fluo, naranja mate, amarillo mate, blanco mate. Peso:...
The 6mm H Nock is compatible with the 6mm FMJ, Hexx, and Aftermath Arrows. Weighs 9 grains. Nock is included with purchase of arrow. Pack de 12...
Culatines de insertar para tubos con un diámetro interior de 6,2 mm. Conocido también como -60 o Super UNI. Perfil especialmente apreciado por los...
Symmetric nocks, which can be used on every Easton and Beman shaft equipped with this system. They are ideal if you use a loop on the string....
Available in the following colours: BK: Black FG: Green OR: Orange WH: White YL: Yellow
Culatín de insertar con un diámetro interior de 5,9 mm adecuado para flechas definidas como -49 o también H (6mm). Disponible en color: verde...
The short, lightweight design of this cam offers maximum speed, precision and durability. Only suitable for use with D-Loop! Available in the...
Plastic nock, suitable for shafts with -60 diameter. Colors available: BK = black FG = fluo green FE = fluo redPack de 12 piezas