BOHNING ENCOCHE UNI SUPER BUSHING BK
Pack de 100 pièces
BOHNING ENCOCHE UNI SUPER BUSHING AP
Pack de 100 pièces
BOHNING ENCOCHE UNI SUPER BUSHING LM
Pack de 100 pièces
BOHNING ENCOCHE UNI SUPER BUSHING RS
Pack de 100 pièces
BOHNING ENCOCHE UNI SUPER BUSHING NO
Pack de 100 pièces
Bohning’s Blazer® Nock fits standard carbon shafts with an ID of .246″ (6.25mm, but commonly known as 6.5mm) and Super UNI Bushing systems. The Blazer® Nock features a double-lock throat and a raised index. Its throat size is .120″ (3.05mm) and each Blazer® Nock weighs an average of 9.0 grains (583.2 mg). Tech tip: for easier insertion and indexing, apply a small amount of Bohning’s Tex-Tite or Seal-Tite Wax to the nock shank.
NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL At Bohning, every nock style must pass the following steps before introduction to the market:
1. Computer simulations identify potential weak points.
2. Destructive testing methods expose possible design flaws or material defects.
3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Pack de 100 pièces
Les encoches avec insert de diamètre intérieur 6,2 mm conviennent à une multitude de tubes et de flèches. Définies également -60 ou Super Uni....
16 autres produits dans la même catégorie :
The 6mm H Nock is compatible with the 6mm FMJ, Hexx, and Aftermath Arrows. Weighs 9 grains. Nock is included with purchase of arrow. Pack de 12 pièces
The Beiter Insert-Nock .166" has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very...
Enfin un nouveau système pour encocher vos flèches. Le nouveau système ThunderBall s’installe rapidement et évite tout problème de torsion de la...
The 4mm G Nock is the heaviest 4mm Nock weighing in at 7 grains. The 4mm G Nock is compatible with the Inspire carbon arrow as with the Super...
A press-fit nock by AAE, the IP (Internal Plastinock) is designed with a shortened body for accuracy and strength.
The .165 - .165 ID (or 4.2 mm)...
Nock 3-04/1
Kategorie: In-Nocken #1
Nock 3-04/2
Kategorie: In-Nocken #2
Available in:
BK: Black
GR: Green
OR: Orange
RD: Red
Features:
Precise contact points for controlled arrow release.
Concentric design to center the nock in the arrow shaft for more consistent...
Uni Bushing Cam from Bohning are suitable for shafts with inner diameter .166" (00-er - Uni Bushing). This cam is provided with dual click and a...
Bohning’s Signature® Nock fits standard carbon shafts with an ID of .246″ (commonly known as 6.5mm or S Nock) and Super UNI Bushing systems. The...
Nock 3-18/2,
Colour: Green
Kategorie: In-Nocken #2
Features:
Precise contact points for controlled arrow release.
Concentric design to center the nock in the arrow shaft for more consistent...
L’encoche In - Out a été réalisée pour pouvoir rentrer à l’intérieur du tube ACE ou X-10 et également s’ajuster très précisément au-dessus de la...
