BIG TRADITION POINT MOUNTING PLIER
Práctica herramienta que facilita el montaje de las puntas en las flechas de madera.
Machine for making wooden nocks.
PROCEDURE:
1) Unscrew the grub screw with the appropriate hexagonal spanner and position the drill bit to the desired depth of the nock.
2) Insert the shaft and by rotating it clockwise, push it in as far as it will go (fig. 1.2).
3) Rotate the shaft until the grain of the wood is parallel to the cut we are going to make, once this is done secure the shaft with the set screw and then proceed to remove the excess wood on both sides (fig. 3-4).
4) Remove the shaft and with the rat tail remove the surplus wood up to the bottom of the hole previously
made (fig-5) .
5) With the larger part of the rat tail , create at the bottom of the cut the correct slot
for the size of your string (fig 6) .
Finish everything with very fine sandpaper before painting and finishing .
Available for two shaft sizes:
5/16
11/32
Machine for making wooden nocks.
PROCEDURE:
1) Unscrew the grub screw with the appropriate hexagonal spanner and position the drill bit to the desired depth of the nock.
2) Insert the shaft and by rotating it clockwise, push it in as far as it will go (fig. 1.2).
3) Rotate the shaft until the grain of the wood is parallel to the cut we are going to make, once this is done secure the shaft with the set screw and then proceed to remove the excess wood on both sides (fig. 3-4).
4) Remove the shaft and with the rat tail remove the surplus wood up to the bottom of the hole previously
made (fig-5) .
5) With the larger part of the rat tail , create at the bottom of the cut the correct slot
for the size of your string (fig 6) .
Finish everything with very fine sandpaper before painting and finishing .
Available for two shaft sizes:
5/16
11/32
16 otros productos en la misma categoría:
Práctica herramienta que facilita el montaje de las puntas en las flechas de madera.
What is Arrow-Fix reliable, fast, economical Arrow-Fix is a tool to work on wood and bamboo shafts. It works quasi like a pencil sharpener and a...
Herramienta para ahusar (tapered) vástagos de madera. Necesita un taladro con una velocidad de rotación de al menos 300 rpm y se completa con una...
Nock remover that allows you to remove nocks from the shaft where the part of the nock protruding from the shaft has broken off. Turn the screw...
Accessory allowing a quick removal of the arrow fletching and OF the glue residues. Thanks to the reversible blade, the tool can be used both by...
EASTON Archery Essentials Pro Shop Tool Kit - Accessories set Working equipment is the be-all and end-all of a successful archer! So keep your bow...
Practical tool for the removal of natural feathers from the shafts.
Cuando las flechas de madera se dañan o agrietan, puedes intentar repararlas cortando el extremo agrietado con un corte diagonal y luego agregando...
Banco para reparar tubos de flechas rotas que se empalman previamente mediante un biselado y encajan exactamente entre sí. Estos se pegan y se...
Drill Guide reliable, fast economical With the Arrow-Fix drill guide it is easy, fast and economical to drill centrical bores into wood and bamboo...
To achieve maximum adhesive strength between the tip and the shaft, it is always a good idea to prepare the shaft by cleaning the inside of the...
Little Choppers are unique tools allowing "do it yourself" archers with the desire for specialty shapes and sizes to cut what they want. All that...
Features: Easily change the screw-in weights on large diameter target shafts Inserts in the nock end of shaft to avoid removing points...