SPIGA WOODEN NOCK CARVING TOOL 5/16"
Machine for making wooden nocks.
PROCEDURE:
1) Unscrew the grub screw with the appropriate hexagonal spanner and position the drill bit to the desired depth of the nock.
2) Insert the shaft and by rotating it clockwise, push it in as far as it will go (fig. 1.2).
3) Rotate the shaft until the grain of the wood is parallel to the cut we are going to make, once this is done secure the shaft with the set screw and then proceed to remove the excess wood on both sides (fig. 3-4).
4) Remove the shaft and with the rat tail remove the surplus wood up to the bottom of the hole previously
made (fig-5) .
5) With the larger part of the rat tail , create at the bottom of the cut the correct slot
for the size of your string (fig 6) .
Finish everything with very fine sandpaper before painting and finishing .
Available for two shaft sizes:
5/16
11/32
SPIGA WOODEN NOCK CARVING TOOL11/32"
Machine for making wooden nocks.
PROCEDURE:
1) Unscrew the grub screw with the appropriate hexagonal spanner and position the drill bit to the desired depth of the nock.
2) Insert the shaft and by rotating it clockwise, push it in as far as it will go (fig. 1.2).
3) Rotate the shaft until the grain of the wood is parallel to the cut we are going to make, once this is done secure the shaft with the set screw and then proceed to remove the excess wood on both sides (fig. 3-4).
4) Remove the shaft and with the rat tail remove the surplus wood up to the bottom of the hole previously
made (fig-5) .
5) With the larger part of the rat tail , create at the bottom of the cut the correct slot
for the size of your string (fig 6) .
Finish everything with very fine sandpaper before painting and finishing .
Available for two shaft sizes:
5/16
11/32
16 other products in the same category:
Precision Vane Spacing Receiver Upgrade for Bitzenburger fletching jig!
Every archer who has fletched their own arrows on the most frequently used...
What is Arrow-Fix
reliable, fast, economical
Arrow-Fix is a tool to work on wood and bamboo shafts. It works quasi like a pencil sharpener and a...
Practical tool for the removal of natural feathers from the shafts.
Blank for repairing broken arrow shafts that are previously spliced by means of a spleistool and thus fit together exactly. These are glued...
To achieve maximum adhesive strength between the tip and the shaft, it is always a good idea to prepare the shaft by cleaning the inside of the...
Tool for tapering wooden shafts. It needs a drill with a rotation speed of at least 300 rpm and is complete with a screw tip to be used as an...
Nock suitable for horseback archery or fast consecutive shooting.
Available in three colors: Blue, Gold, and Red. Pack of 12 pieces
EASTON Archery Essentials Pro Shop Tool Kit - Accessories set
Working equipment is the be-all and end-all of a successful archer! So keep your bow...
Preps an arrow shaft for installing points and inserts. Cleans all regular sized .245-.247 ID carbon shafts.
Drill stand to be fixed on the table
Features:
Easily change the screw-in weights on large diameter target shafts
Inserts in the nock end of shaft to avoid removing points...
When wooden arrows get damaged or crack you can try to fix them cutting the cracked end with a diagonal cut and then adding a piece of shaft...
Drill Guide
reliable, fast economical
With the Arrow-Fix drill guide it is easy, fast and economical to drill centrical bores into wood and bamboo...
Little Choppers are unique tools allowing "do it yourself" archers with the desire for specialty shapes and sizes to cut what they want. All that...
