ARROW SHAFTS AND COMPONENTS
ARROW SHAFTS AND COMPONENTS There are 175 products.
EASTON POINT X-10 BREAK OFF
X10 Stainless Steel Break-Off Points WEIGHT: 0.5 lbs SIZE: 100-120 Grains, 80-100 Grains
GOLD TIP GLUE IN POINT .204" ACCU
Gold Tip glue in points are made from hardened stainless steel, offer seamless fit, tight weight tolerances and are equipped to utilize Gold Tip's...
GOLD TIP GLUE IN POINT .166" ACCU
Gold Tip glue in points are made from hardened stainless steel, offer seemless fit, tight weight tolerances and are equipped to utilize Gold Tip's...
EASTON VANES DIAMOND
More accurate, faster, durable than other brands. A special formula now provides even more durability. Diamond Vanes feature a concave base with an...
EASTON POINT 4MM ML
Fits 4MM Arrows – Please refer to our product guides for you specific sizing Fits Carbon One Arrows SIZES AVAILABLE: 70-90 GRAINS – #2 90-110...
BOHNING POINT X23
Tip compatible with shafts Easton X23. Pin profile with smooth tip won't damage quiver. Machined from 303 stainless steel. Guaranteed weight...
EASTON VANES TITE FLIGHT
Special rib for added stiffness; cuts in-fight flutter and noise. All weights are within ±0.5 grain. SIZES: 175, 200 LENGTH (inches): 1.750,...
BOHNING POINT BR.OFF .166"
Parabolic Break-off Points fit arrows with an ID of .166″ (commonly known as 4mm) and feature two detachable 10 grain weight sections to find your...
BOHNING PLASTIFLETCH X-VANES 1.5
The 1.5" X Vane¿ in shield form is recommended for Fita and field shooting. The 1.5" (38.1mm) X Vane is 0.35" (8.9mm) high and weighs an average of...
BOHNING VANES BLAZER TIGER 100PCS
The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in...
BOHNING VANES BLAZER+WRAPS
Set consisting of 12 wrap for shafts with standard diameter (approx. 19/64" or 7.5 mm) and Blazer feathers. The feathers are white (12 pcs.) and in...
BOHNING PLASTIFLETCH BLAZER 100PCS
The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in...
BOHNING PLASTIFLETCH ICE 100PCS
The Ice Vane was developed for Fita and field shooting. This long and ultra flat profile is ideal for stabilising thin and stiff arrows in windy...
BOHNING PLASTIFLETCH X-VANES 3.5"
Plastic vanes made with the same material as the blazers, very durable and easy to glue. Ideal from and dimensions for target shooting. Length:...
BOHNING X-VANES 2.25
The 2.25" X Vane in Shield form is recommended for 3D and indoor shooting. The 2.25" (57.2mm) X Vane is 0.37" (9.4mm) high and weighs an average of...
BOHNING PLASTIFLETCH X-VANES 1.75
Available colours: BK - BLACK BL - BLUE GR - FLUO GREEN FY - FLUO YELLOW HP - FLUO PINK NO - FLUO ORANGE RD - RED WH -...
BOHNING PLASTIFLETCH ZEN 4" 100PCS
For years Bohning has been known for its innovations in vane design and 2019 continues that trend with the debut of the new Zen Vane for indoor...
BOHNING PLASTIFLETCH AIR 2"
The Air Vanes have the same ultra-low profile height as the Ice Vane, with an X-Vane Shield Cut inspired tail. Designed for field archery Great...
EASTON ARROW HYPERSPEED
Hyperspeed arrows are all-around performers for target, 3D, and hunting. The Hyperspeed arrows are ultra lightweight 6.5MM shafts combine all-out...
EASTON ARROW INSPIRE
Arrow complete with vanes, nock and point, glued into the shaft.
BOHNING PLASTIFLETCH BLAZER X2
The Blazer® X2 Vane is designed for 3D and Indoor. Guarantees flatter trajectories on long dsitances and is the narrowest vane allowed in the IBO...
EASTON SHAFT X-10
The X-10 was developed for outdoor target and in particular for 70-meter, head-to-head Competitions of the highest level. Since its introduction at...
EASTON SHAFT APOLLO
Apollo is the all-carbon starter shaft with the tolerances and spine sizes needed to ensure a correct tune for every archer. Tough and durable, yet...
EASTON SHAFT A/C/E
For more than three decades A.C.E. has dominated every competition in every discipline, and today it can be considered a “veteran” of competitions....
GOLD TIP SHAFT ULTRALIGHT PRO .001
The Ultralight Pro is built for the archer that’s counting on winning their paycheck. Whether it's 3D, Field or Target, the Ultralight Pro is...
GOLD TIP SHAFT PIERCE TOUR BLACK
New for 2017, the Pierce Tour is specifically engineered for outstanding performance in outdoor archery conditions where long distances rule and...
GOLD TIP SHAFT ULTRALIGHT BLACK
Shaft is supplied without components, these must be purchased separately.
EASTON SHAFT SUPERDRIVE 23
The SuperDrive 23 shaft has the largest diameter allowed by World Archery, built in carbon, mainly for indoor and 3D shooting. Available in three...
GOLD TIP SHAFT PIERCE PLAT. W/O-INS.
Shaft supplied with Insert Nock. Available Shafts in Spine 340 currently also include the collar ring.
GOLD TIP SHAFT ULTRALIGHT ENTRADA
The Ultralight Entrada is a top pick for entry level shooters that have a need for speed. With a wide range of spines from 300 to 700, matching the...
GOLD TIP SHAFT TRADITIONAL
Gold Tip’s Traditional Series combines the elegant look of classic wood-grained cedar with the proven performance and durability of 100% carbon...
BOHNING NOCK UNI SUPER BUSHING
Bohning’s Blazer® Nock fits standard carbon shafts with an ID of .246″ (6.25mm, but commonly known as 6.5mm) and Super UNI Bushing systems. The...
BOHNING NOCK SIGNATURE
Bohning’s Signature® Nock fits standard carbon shafts with an ID of .246″ (commonly known as 6.5mm or S Nock) and Super UNI Bushing systems. The...
GOLD TIP NOCK ACCU-LITE
The short, lightweight design of this cam offers maximum speed, precision and durability. Only suitable for use with D-Loop! Available in the...
BOHNING NOCK UNI BUSHING
Uni Bushing Cam from Bohning are suitable for shafts with inner diameter .166" (00-er - Uni Bushing). This cam is provided with dual click and a...
GOLD TIP NOCK STANDARD .246
Available in the following colours: BK: Black FG: Green OR: Orange WH: White YL: Yellow
GOLD TIP INSERT ACCU-TOUGH SS .204"
Insert or point adapter for Traditional Classic arrows. SPECIFICATIONS Constructed of stainless steel Spine specific fit 340 spine - 80...
GOLD TIP BALLISTIC COLLAR .166"
Ballistic Collars add additional durability to the front of your arrow. This system is designed for the Pierce and Pierce Platinum arrows and is...
GOLD TIP NOCK COLLAR .166"
Protective Ballistic Collar designed to be used with Pierce Series inserts. Machined rings correspond with specific spine of arrow. (4 rings =...
EASTON NOCK PIN "G"
The 4mm G Pin Nock is compatible with the many arrows in Easton’s target line including the X10, Procomp, A/C/E and Avance. Corresponding pin...
EASTON NOCK PIN
Easton’s Pin Nock is made for Easton’s ultra slim Target arrows. Compatible with the X10, A/C/E, Pro Comp and and Avance arrows. 2 Grains Pack of...