BEITER V-BOX SPACER 3MM 6PCS
Spacer Size: 3mm 6 pieces Available in: BK: Black BL: Blue FY: Neon Yellow GR: Green OR: Orange PK: Pink PR: Purple...
The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.
How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.
Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.
IMPORTANT: Do not choose a too soft a membrane. If you see that the weight is bending the Beiter V-BOX, then use a harder membrane or less weight!
It is important to use the maximum weight setup only with the two hardest membranes (#5 and #7). The Compensation Spacer is not only useful for shifting weight: thanks to the Spacers low weight, you can use it as placeholder on the threads. The various colours available can be combined to individually customize your Beiter V-BOX System and stabilisation! It is important to use the base plate, which is not only an optical transition between the V-BOX and the stabilizer system, but provides an extremely stable connection between components. The V-BOX has a diameter of 32mm. Base Plates are available in 30 to 26mm, 30 to 23mm and 30 to 20mm sizes.
Spacer Size: 3mm 6 pieces Available in: BK: Black BL: Blue FY: Neon Yellow GR: Green OR: Orange PK: Pink PR: Purple...
Adapter 1/4″IN-5/16″ x 1″ Size: 25mm Weight: 7.25 gram
Adapter 1/4″IN-5/16″ x 2″ Size: 50mm Weight: 15.50 gram
Adapter 1/4″OUT-5/16″ x 1″ Size: 25mm Weight: 7.25 gram
Adapter 1/4″OUT-5/16″ x 2″ Size: 50mm Weight: 15,50 Gram
Set of two end steel weights and spacers that transform the standard V-Box in a new Steel V-Box. Heavier and stronger.
16 otros productos en la misma categoría:
Rib designed rubber damper with 1/4in threads. Colour: Black Lengths: 1.5" Total weight: 30g Threads: 1/4"
The kit includes a V-Box and a range of accessories to get you started and help you find the optimal configuration. It is compatible with all...
Thread: ¼”-20 Material: BTR100 Specializes in supporting 3-6oz of weights
Add an extra element of vibration, noise, and hand shock reduction to your stabilizer. These Broadband Stabilizer Enhancers are made from NAVCOM®...
Amortiguador de vibraciones fabricado en goma con doble rosca hembra de 5/16" y 16mm de profundidad. Diámetro en los extremos 25mm, longitud total...
Good performing counter balance weight featuring a rib designed rubber section, a slim bodied connecting section and a weight system with a...
The Stabilizer Enhancer is designed to attach to the end of your stabilizer for added resonate vibration reduction. It fits any 5/16″ bolt hole and...
For a year, AXCEL®'s design team tested almost every stabilizer and vibration dampener on the market to see what works and what is hype. They were...
Upgrade any target stabilizer to a dynamic stabilizer with the Target Stabilizer Dampener. It boosts performance by minimizing whip and vibration...
A result of extensive development & testing, the new TwistLox limb dampeners noticeably dampen noise and vibration when shooting your compound...
Allows you to reduce the amount of vibration in your bow after the shot Slides down the length of your stabilizer for ultimate adjustability...
BEITER V-BOX STEEL is a multifunctional dampening system for bow stabilizers, the heaviest version of the original BEITER V-BOX. The stiffness of...
Reduces vibrations Designed to be mounted on a riser 5/16 thread size