EPIC ARCHERY FUSION EX300 RUBBER DAMPER
Rib designed rubber damper with 1/4in threads. Colour: Black Lengths: 1.5" Total weight: 30g Threads: 1/4"
For a year, AXCEL®'s design team tested almost every stabilizer and vibration dampener on the market to see what works and what is hype. They were then able to create bars and dampeners that would work better than anything currently available. One of the most revolutionary products that came from that research is the AXCEL X-VIBE Vibration Dampener. This dampener attaches to the outer diameter of the carbon rod and pinches rubber tight against the carbon with a 3 oz stainless steel weight to ensure spectacular shock absorption at the initial shot of the bow and throughout the remainder of the shot sequence. The X-Vibe can slide the entire length of the carbon bar, so you can put the vibration damper where you want it. However, the best results seems to be achieved with the damper between three and four inches from the end of the stabilizer. The new X-VIBE comes standard with the AXCEL® CarboFlax® Acclaim 550 Stabilizer, but will be also be sold separately for addition to our CarboFlax 500 and 650 bars or any other bar in 0.500", 0.550" or 0.650" sizes. The AXCEL® X-VIBE is covered by US Pat. 10,655,927, licensed through Mathew's® Inc.
NOTE: this model fits stabilizers with .550" outside diameter.
16 other products in the same category:
Rib designed rubber damper with 1/4in threads. Colour: Black Lengths: 1.5" Total weight: 30g Threads: 1/4"
Thread: ¼”-20 Material: BTR100 Created with the best combination from hundreds of tests with different rubber blends Maximizes surface...
Dampener with Broadband technology, sharply reduces vibration and helps improve shot feel. Designed to be mounted as a stabiliser end, it has a...
Add an extra element of vibration, noise, and hand shock reduction to your stabilizer. These Broadband Stabilizer Enhancers are made from NAVCOM®...
Thread: ¼”-20 Material: BTR100 Specializes in supporting 1-3oz of weights
Vibration damper made of rubber with threaded insert in 5/16" and threaded pin from 1/4!" to 5/16". Due to the long thread in 5/16", the threaded...
3.5 OZ. Weight with 5/16" thread complete with vibration dampers available in various colours. Can be used as a stabilising weight or attached...
Vibration damper made of rubber with double thread female 5/16" deep 16mm. The diameter at the ends is 25mm, the total length is 40mm. Weight about...
Kryptós Pro™ Adjustable Vibration Dampeners Possibly the most exciting new product in Axcel stabilizer line is the adjustable stiffness Kryptós...
Thread: ¼”-20 Material: BTR100 Created with the best combination from hundreds of tests with different rubber blends
Rubber damper to be insterted on the stabilizer to obtain an immediate reduction of vibration after the shot. Very effective, it fits all standard...
Allows you to reduce the amount of vibration in your bow after the shot Slides down the length of your stabilizer for ultimate adjustability...
The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the...