STABILIZERS
STABILIZERS There are 41 products.
EXE V-BAR FIXED 35X0 W/O SCREW
The classic V-Bar EXE is now supplied as standard with housing to accept the EXE Pin Adapter or for Beiter Pin extensions. Available in black,...
GRAVITY LONG ROD LD
The stabiliser is manufactured from 3K carbon, which provides excellent stiffness at a very low weight. Complete with an integrated vibration...
GRAVITY SIDE ROD LD
The LD side stabilizzor are made of 3K carbon, which provides excellent rigidity at a very low weight. Both centre and side stabilizzor are...
GRAVITY EXTENDER LD/SD
3K carbon extension, which provides excellent stiffness at a very low weight. Available in 3 different lengths: 4", 5" and 6" inches.
GRAVITY SIDE ROD SD
The 10" SD side stabilizzer are made of 3K carbon, which provides excellent rigidity with a very low weight and a diameter of approximately 16mm....
GRAVITY LONG ROD SD
The SD centre stabiliser is manufactured from 3K carbon, which provides excellent stiffness with a very low weight and a diameter of approximately...
EXE PIN ADAPTER
Adapter with pin for special EXE or Beiter v-bar. Used directly on the riser or stabiliser extension to perfectly align the v-bar and bring it into...
GRAVITY STABILIZER WEIGHT 31.5MM
Stabilizer weight with a diameter of 31.5 mm, 1/4" screw and hole to add more weights on top of it. Available with 29 g, 58 g and 116 g weights.
EXE V-BAR ALUMINUM "QUICK DETACH"
Compact and very light V-BAR, integrates the standard quick release for side stabilisers and central stabiliser. Compatible with the EXE pin...
EXE WEIGHT FOR BARE BOW
Stainless steel one-piece weights for barebow. 5/16" thread to fit the weight to the bow. Available in 200, 250, 300 grams versions.
EXE SPEEDER V-BAR
Aluminium V-BAR Speeder complete with fixing bushing. Available in 3 different angles: 35°, 40° and 45° degrees.
EXE SPEEDER STAB.SET
Carbon stabilisation complete with 1 stabiliser bar available in different lengths 2 x 10" carbon stabiliser 1 4" carbon extension 1...
GRAVITY STABIL.SET LD 31.5"+ 2X10"+4"
Complete stabiliser set consisting of: central stabiliser 31.5", 2 side stabilisers with 10", extension 4", bushing and V-bar. The tubes of the...
GRAVITY SINGLE ADJUSTABLE V-BAR
A single V-bar used primarily for compound bows to compensate for the imbalance caused by the off-centre firing window, the sight and the...
GRAVITY EXTENDER COMPOUND 4.5"
Particularly robust extension, made of milled and anodised aluminium, with central lightening to contain the vibration damper without compromising...
EXE STABILIZER WEIGHT INOX CAP
Steel end weight, with 1/4" thread. Weight: approx. 42 g Diameter: 19 mm Height: 26.5 mm
EXE V-BAR BOLT 5/16"
Lightweight and practical aluminum V-bar bushing to fix your V-bar to your bow. Complete with anti-vibration and anti-unscrewing o-ring.
GRAVITY STABIL.SET SD 30.0"+ 2X10"+4"
Set of stabilizers with 30" central rod, pair of 10" side rods, 4" extension, bush and V-Bar. The stablires are in made of 3K carbon, which allows...
EXE STAB.SLEEVE CENT 31-33"
Fabric case with Velcro closure to protect your stabilizer. Can be used for stabilizers with lenghts from 31" to 33"
EXE STABIL. EVOLUTION SIDE ROD 10"
Sidebar in aluminum of 10" with front weight.
FIVICS SIDE ROD LVT 10" SL
GRAVITY V-BAR BOLT 5/16"
Steel bush for fixing the V-bar. Fitted with a pin as standard, simplifies fixing.
EXE THREADED NUT 1/4"-5/16"X24
Reducer from 5/16" to 1/4" for weights and stabilisation.
EXE STAB. SPEEDER MID- WEIGHT
Steel weight with 1/4" thread. Approx. 23.5 g weight. Diameter: 19 mm Height: 16 mm
FIVICS STABILIZER EXTENDER LVT 4" SL
EXE V BAR FIXED 35X0 WITH SCREW
35° aluminium V-Bar complete with fixing bushing.
GRAVITY QUICK DISCONNECT STRAIGHT 20MM
Quick release with 20 mm diameter for the use of very thin stabilisers. Machined and anodised aluminium with a stabiliser connection angle of 0°.
GRAVITY QUICK DISCONNECT STRAIGHT 24MM
Quick release with 24mm diameter for the use of very thin stabilisers. Machined and anodised aluminium with a stabiliser connection angle of 0°.
EXE BLIZZARD RISER WEIGHT 450 G
Weight compatible with Exe Blizzard riser. Available in 450 grams version.
EXE STABILIZER COMPETITOR 30"
Central carbide stabiliser complete with head weight. Length 30".
EXE THREADED NUT 5/16"X24
Grains 5/16 " x 24 for stabilizers and weights available in different lengths. 25mm 38mm 40mm
EXE STAB. WEIGHT CENT.INOX+O-RING
Steel end weight, with 1/4" thread. Weight: 42 g approxiamtely Diameter: 19 mm Height: 21 mm
FIVICS COM CONNECTING BOLT QD 10¿ LOW
Quick Disconnect bolt Angle: 10° Material: Aluminum
FIVICS V-BAR LOK 40¿
Locked on Kenetics! Hi Quality Aluminum Construction Reduced Vibration ¾” Diameter Weight: 2oz
FIVICS UPSTAB.VIB.DAMPENER TNV2300
Soma offers a vibration damper system to fix directly to the riser. Compared to many other systems available on the market this damper is...
EXE SPEEDER STAB.SET BK 28"+11"+5"
Carbon stabilisation complete with: 1 28'' stabiliser bar 2 11" carbon stabilisers 1 5'' carbon extension 1 35° V-bar complete with...
EXE SPEEDER STAB.SET NO EXT
Stabilizzazione in carbonio completa di: 1 Centrale in carbonio 2 astine in carbonio 1 V-bar completo di boccola 3 doinker 3 pesi...