BOHNING PLUMES BLAZER TIGER YL 100PCS
The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in length, 0.57" (14.5mm) in height, and weighs an average of 6.0 grains (388.8 mg). True Color printed Blazers weigh an average of 6.3 grains (408.2 mg). Like all Bohning vanes, the base of the Blazer Vane is pre-primed for optimal adhesion. The Blazer® Vane has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the "knock-off", "wanna-be", "copy-cat" vanes combined! This is the vane that, hands down, out-performs them all! It's designed for fixed-blade broadheads but is also perfect for crossbows and 3D archery. The Blazer® Vane, with its unique design, begins steering and correcting immediately - making believers out of bow hunters and target shooters alike! The combination of the steep leading edge angle and its material properties enables air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow also makes the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer® Vanes provide. We recommend fletching Blazer® vanes with a helical for perfect results. What's in your quiver? If it doesn't say Blazer® and carry the Bohning® logo, it's not a REAL BLAZER. Only Bohning makes the Blazer Vane, and we proudly print our name on each one. It's not just the profile that sets us apart from look-a-likes, our proprietary material has been tested in extreme conditions to make sure it doesn't fail you when it really counts. Don't be fooled by copycats. If it doesn't say Bohning, it's not a Blazer and it won't perform like one. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Pack de 100 pièces
BOHNING PLUMES BLAZER TIGER OR 100PCS
The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in length, 0.57" (14.5mm) in height, and weighs an average of 6.0 grains (388.8 mg). True Color printed Blazers weigh an average of 6.3 grains (408.2 mg). Like all Bohning vanes, the base of the Blazer Vane is pre-primed for optimal adhesion. The Blazer® Vane has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the "knock-off", "wanna-be", "copy-cat" vanes combined! This is the vane that, hands down, out-performs them all! It's designed for fixed-blade broadheads but is also perfect for crossbows and 3D archery. The Blazer® Vane, with its unique design, begins steering and correcting immediately - making believers out of bow hunters and target shooters alike! The combination of the steep leading edge angle and its material properties enables air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow also makes the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer® Vanes provide. We recommend fletching Blazer® vanes with a helical for perfect results. What's in your quiver? If it doesn't say Blazer® and carry the Bohning® logo, it's not a REAL BLAZER. Only Bohning makes the Blazer Vane, and we proudly print our name on each one. It's not just the profile that sets us apart from look-a-likes, our proprietary material has been tested in extreme conditions to make sure it doesn't fail you when it really counts. Don't be fooled by copycats. If it doesn't say Bohning, it's not a Blazer and it won't perform like one. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Pack de 100 pièces
The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in length, 0.57" (14.5mm) in height, and weighs an average of 6.0 grains (388.8 mg). True Color printed Blazers weigh an average of 6.3 grains (408.2 mg). Like all Bohning vanes, the base of the Blazer Vane is pre-primed for optimal adhesion. The Blazer® Vane has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the "knock-off", "wanna-be", "copy-cat" vanes combined! This is the vane that, hands down, out-performs them all! It's designed for fixed-blade broadheads but is also perfect for crossbows and 3D archery. The Blazer® Vane, with its unique design, begins steering and correcting immediately - making believers out of bow hunters and target shooters alike! The combination of the steep leading edge angle and its material properties enables air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow also makes the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer® Vanes provide. We recommend fletching Blazer® vanes with a helical for perfect results. What's in your quiver? If it doesn't say Blazer® and carry the Bohning® logo, it's not a REAL BLAZER. Only Bohning makes the Blazer Vane, and we proudly print our name on each one. It's not just the profile that sets us apart from look-a-likes, our proprietary material has been tested in extreme conditions to make sure it doesn't fail you when it really counts. Don't be fooled by copycats. If it doesn't say Bohning, it's not a Blazer and it won't perform like one. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Pack de 100 pièces
16 autres produits dans la même catégorie :
Available in sizes:
16; 23; 26; 40 & 50
Colour Coding:
BK: Black
BL: Blue
GD: Sunset Gold
GR: Green
OR: Fire Orange
PK:...
Plumes avec profil parabolique, produit avec un matériau de haute performance, élastique et résistant. Le composé spécial dont ils sont composés...
Les Vanes Pro Max de AAE mesure 1,7" x .40" conçue pour étre la taille idéale pour le tir 3D et les broadheads écaniques. Fabriqué avec un matériau...
The Ice Vane was developed for Fita and field shooting. This long and ultra flat profile is ideal for stabilising thin and stiff arrows in windy...
FFP's Quality Crafted Vanes Are Now Perfect! Flex-Fletch Products, The Home of World Class Championship Vanes, is pleased to announce the new...
Available colours:
BK - BLACK
BL - BLUE
GR - FLUO GREEN
FY - FLUO YELLOW
HP - FLUO PINK
NO - FLUO ORANGE
RD - RED
WH -...
All Hybrid vanes are manufactured using the industry-leading Plastifletch “Lick & Stick” material with a factory-applied activator. It features...
FFP's Quality Crafted Vanes Are Now Perfect! Flex-Fletch Products, The Home of World Class Championship Vanes, is pleased to announce the new...
The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in...
Special rib for added stiffness; cuts in-fight flutter and noise.
All weights are within ±0.5 grain.
SIZES: 175, 200
LENGTH (inches): 1.750,...
FFP's Quality Crafted Vanes Are Now Perfect! Flex-Fletch Products, The Home of World Class Championship Vanes, is pleased to announce the new...
Plastic parabolic vane.
Length 4".
Pack of 100 pcs. Pack de 100 pièces
The Cross-X Nerve rubber vane has grooves running lengthwise through it, making it stiffer than a standard smooth rubber vane.
Parabolic cut,...
Plumes en plastique qui donnent d'excellents résultats dans le tir de chasse. Le profil élevé permet d'améliorer le vol de la flèche avec pointe de...
