BOHNING PLASTIFLETCH IMPULSE 100PCS
The newest addition to the Bohning® family of vanes is the IMPULSE™ - this revolutionary vane is the result of over 2 years of research in...
The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in length, 0.57" (14.5mm) in height, and weighs an average of 6.0 grains (388.8 mg). True Color printed Blazers weigh an average of 6.3 grains (408.2 mg). Like all Bohning vanes, the base of the Blazer Vane is pre-primed for optimal adhesion. The Blazer® Vane has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the "knock-off", "wanna-be", "copy-cat" vanes combined! This is the vane that, hands down, out-performs them all! It's designed for fixed-blade broadheads but is also perfect for crossbows and 3D archery. The Blazer® Vane, with its unique design, begins steering and correcting immediately - making believers out of bow hunters and target shooters alike! The combination of the steep leading edge angle and its material properties enables air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow also makes the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer® Vanes provide. We recommend fletching Blazer® vanes with a helical for perfect results. What's in your quiver? If it doesn't say Blazer® and carry the Bohning® logo, it's not a REAL BLAZER. Only Bohning makes the Blazer Vane, and we proudly print our name on each one. It's not just the profile that sets us apart from look-a-likes, our proprietary material has been tested in extreme conditions to make sure it doesn't fail you when it really counts. Don't be fooled by copycats. If it doesn't say Bohning, it's not a Blazer and it won't perform like one. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in length, 0.57" (14.5mm) in height, and weighs an average of 6.0 grains (388.8 mg). True Color printed Blazers weigh an average of 6.3 grains (408.2 mg). Like all Bohning vanes, the base of the Blazer Vane is pre-primed for optimal adhesion. The Blazer® Vane has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the "knock-off", "wanna-be", "copy-cat" vanes combined! This is the vane that, hands down, out-performs them all! It's designed for fixed-blade broadheads but is also perfect for crossbows and 3D archery. The Blazer® Vane, with its unique design, begins steering and correcting immediately - making believers out of bow hunters and target shooters alike! The combination of the steep leading edge angle and its material properties enables air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow also makes the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer® Vanes provide. We recommend fletching Blazer® vanes with a helical for perfect results. What's in your quiver? If it doesn't say Blazer® and carry the Bohning® logo, it's not a REAL BLAZER. Only Bohning makes the Blazer Vane, and we proudly print our name on each one. It's not just the profile that sets us apart from look-a-likes, our proprietary material has been tested in extreme conditions to make sure it doesn't fail you when it really counts. Don't be fooled by copycats. If it doesn't say Bohning, it's not a Blazer and it won't perform like one. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
The Blazer® Vane is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2" (50.8mm) in length, 0.57" (14.5mm) in height, and weighs an average of 6.0 grains (388.8 mg). True Color printed Blazers weigh an average of 6.3 grains (408.2 mg). Like all Bohning vanes, the base of the Blazer Vane is pre-primed for optimal adhesion. The Blazer® Vane has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the "knock-off", "wanna-be", "copy-cat" vanes combined! This is the vane that, hands down, out-performs them all! It's designed for fixed-blade broadheads but is also perfect for crossbows and 3D archery. The Blazer® Vane, with its unique design, begins steering and correcting immediately - making believers out of bow hunters and target shooters alike! The combination of the steep leading edge angle and its material properties enables air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow also makes the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer® Vanes provide. We recommend fletching Blazer® vanes with a helical for perfect results. What's in your quiver? If it doesn't say Blazer® and carry the Bohning® logo, it's not a REAL BLAZER. Only Bohning makes the Blazer Vane, and we proudly print our name on each one. It's not just the profile that sets us apart from look-a-likes, our proprietary material has been tested in extreme conditions to make sure it doesn't fail you when it really counts. Don't be fooled by copycats. If it doesn't say Bohning, it's not a Blazer and it won't perform like one. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
16 other products in the same category:
The newest addition to the Bohning® family of vanes is the IMPULSE™ - this revolutionary vane is the result of over 2 years of research in...
Proven to be more accurate than other high-profile hunting vanes. Max Hunter is a high-profile hunting vane that produces great broadhead flight....
Set consisting of 12 wrap for shafts with standard diameter (approx. 19/64" or 7.5 mm) and Blazer feathers. The feathers are white (12 pcs.) and in...
All Hybrid vanes are manufactured using the industry-leading Plastifletch “Lick & Stick” material with a factory-applied activator. It features...
FFP's Quality Crafted Vanes Are Now Perfect! Flex-Fletch Products, The Home of World Class Championship Vanes, is pleased to announce the new...
Available in sizes: 16; 23; 26; 40 & 50 Colour Coding: BK: Black BL: Blue GD: Sunset Gold GR: Green OR: Fire Orange PK:...
AAE’s latest breakthrough in vane material and technology. The WAV vane is designed to be very accurate, tough, and simple to install for the world...
FFP's Quality Crafted Vanes Are Now Perfect! Flex-Fletch Products, The Home of World Class Championship Vanes, is pleased to announce the new...
If you can boil water, you can professionally crest and fletch an arrow in less than 10 seconds. QuikFletch is the easiest way to fletch your...
The Gas Pro Vanes key of success is their innovative material developed and produced in Italy. Thanks to it Gas Pro vanes are more elastic and more...
The 2.25" X Vane in Shield form is recommended for 3D and indoor shooting. The 2.25" (57.2mm) X Vane is 0.37" (9.4mm) high and weighs an average of...
The Cross-X Nerve rubber vane has grooves running lengthwise through it, making it stiffer than a standard smooth rubber vane. Shield cut, 2.5"...
The Cross-X Nerve rubber vane has grooves running lengthwise through it, making it stiffer than a standard smooth rubber vane. Parabolic cut,...