GRAVITY RISER ILF TWO TONE
Traditional riser with ILF system made of Zebrawood and black Micarta with red interspace. The ILF system is suitable for all ILF limbs available...
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
Latitude II Riser with ILF attachment features a NEW FLECTING ALIGNMENT SYSTEM that makes the riser more robust and less prone to breakage.
Manufactured from a laminated wood, it features colours in which the colour and grain of the wood combine to create a unique arabesque on each piece. In fact, the various coloured and grey/black layers alternate in a non-constant manner over the thickness of the wood and the result is therefore always new and interesting. The riser is equipped with an adjustable limb screw and alignment system. There are no threaded holes for adding accessories.
COMBINED LENGTHS OF RISER WITH RECURVE Limbs: The power of Olympic recurve bow limbs is measured on the basis of a 25" riser. If those same limbs are used on shorter risers it must be considered that they will develop 1# more power per inch of length lost.
Example: a 30# Cross Carbon limb on a 19" Latitude riser develops approximately 36#. Also consider that power is always measured at a 28" extension and that each additional inch of extension increases the power developed by approximately 2#. All of these figures are to be considered APPROXIMATE as different limbs geometries give different results.
Weight:
17" = approx. 565g
19" = approx. 620g
21" = approx. 680g
14 other products in the same category:
Traditional riser with ILF system made of Zebrawood and black Micarta with red interspace. The ILF system is suitable for all ILF limbs available...
HUNTING TRISER AVAILABLE IN 17" AND 19" TYPE: ILF (INTERCHANGEABLE LIMBS) WEIGHT: 980/1100g MATERIAL: AL6061-T6 CNC MILLED AND ANODISED ALUMINIUM...
This ILF riser is built with walnut in the back, cored with red padouk, maple, and white oak. The front side is made of Black Technowood and the...
2nd generation of ultimate in performance, accuracy & versatility 19” Titan II has two unique broadhead chamfer cutouts Accepts all ILF...
Riser with ILF mount built in special medium density plywood. Nice brown-reddish-black color. Although the length doesn not exceed 19" the riser...
2nd generation of ultimate in performance, accuracy & versatility 17” Titan II has two unique broadhead chamfer cutouts Accepts all ILF...
Riser with ILF limb fitting system. The riser is produced with a laminated wood, where the different colors of the layers and the texture of the...
Traditional multilayer riser with ILF attachment made of Phenolic material and the central part in Technowood. The ILF attachment is suitable for...
Beautiful and elegant hunting riser, in aluminum milled from a solid block. 17" long, it is equipped with an ILF-type limb attachment system, with...
The Scream riser was previously only available in 17" length and in black. Now the line is available in: 3 lengths: 17" - 19" - 21" and this in the...
Traditional multilayer riser with ILF attachment, made of Phenolic and Technowood materials. The ILF attachment is suitable for the use of all...
Beautiful hunting riser in 17 inch, weighing just under 800 grams, made of stabilised wood and equipped with ILF receiver system. Due to the...